Hi, and welcome to FlexQube

Select language / market

Over the past couple of years FlexQube has been happy to deliver a wide array of material handling carts to more than one Siemens facility.

We have found that the flexible FlexQube design has been able to match the high standards and expectations set by Siemens. The carts that we have delivered to Siemens vary from Mother-Daughter solutions to more basic 50 x 50 tugger carts. Below is an outline of all the solutions we have provided to Siemens.

Tugger Cart

Tugger Cart 3710 x 1610 mm – Q-100-0531

This 3710 x 1610 mm cart is specially designed for transporting fully loaded containers. This large industrial tugger cart is equipped with an ergonomic handlebar and a drop pin tow bar making it easy to transport in a tugger train set-up.

View cart
Shelf Cart

Shelf Cart 2730 x 1260 MM - Q-100-0676

This is a very robust large shelf cart, which has been designed for transporting very large and heavy materials. This cart has had wire mesh attached to keep the materials securely in place. This cart can be modified with a tow bar or added handlebars if needed.

View cart
Stage Cart

Stage Cart 1610 x 910 MM - Q-100-0692

This stage cart is a perfect example of how flexible the FlexQube system is. This cart was designed to easily stage materials so the operators/assemblers are able to easily access the materials to boost productivity. The materials can be placed in between the upright tubes to keep them securely in place.

View cart
Assembly Cart

Assembly Cart 2170 x 770 MM - Q-100-0690

This assembly cart has been created for assemblers to easily keep materials and tools in one place. This assembly cart can also be used as a work table as the four attached swivel casters all come with brakes to keep the cart locked firmly in place.

VIEW CART
Cart for Hanging

Cart for Hanging 1680 x 700 mm – Q-100-0714

This small cart is specifically designed to easily hang hoses, tubes and wires. This cart can also be used to hang circular materials of different types. This cart has been able to significantly boost assembly times, because of the easy access it offers assemblers.

Tugger Cart

Tugger Cart 1270 x 1270 MM – Q-100-0112

This 1270 x 1270 mm tugger cart with attached steel flat deck is perfectly designed for transporting fully loaded pallets and containers. This is one of FlexQube’s most popular solutions, because of it’s robustness and simple design. This cart is equipped with an ergonomic handlebar and a drop pin and hitch tow bar, for use in a tugger train set-up. It also comes with a floor lock brake to secure the cart in place when not being transported.

View cart
MOTHER CART

Mother Cart 2030 x 1260 mm – Q-100-1002

This small mother solution has been created to hold four daughter carts within its frame. The four daughter carts can be unlocked from this mother frame and left at different work and assembly stations (learn more about Mother-Daughter solutions). This mother frame is equipped with a drop pin and hitch tow bar to be transported using a tugger train set-up.

View cart
KIT CART

Kit Cart 1330 x 700 mm – Q-100-1042

This kit cart is actually designed to be used as a daughter cart within a mother frame. This kit cart comes equipped with small flat shelves as well as hanging bins across the top to hold small materials and tools. The Mother frame these carts fit into is outlined below.

View cart
MOTHER CART

Mother Cart 2 in 1 1680 x 1610 mm – Q-100-1043

This 2 in 1 mother frame is the mother cart for the above kit carts. This mother frame can house two daughter carts at a time and is equipped with a drop pin and hitch tow bar for use in a tugger train set-up.

View cart
MOTHER CART

Mother Cart 4 in 1 High Dollies 1890 x 910 mm – Q-100-0851

This 4 in 1 Mother frame is designed to house up to four tall daughter carts inside. Each of the shelf carts can be unlocked from the frame and left at different work stations. This mother frame is equipped with a drop pin and hitch tow bar and is designed to be towed in a tugger train system. The daughter carts for this mother frame are outlined below.

View cart
DAUGHTER CART

Daughter Cart 630 x 420 mm – Q-100-0835

This 630 x 420 mm daughter cart is designed to fit the above 4 in 1 Mother frame. These daughter carts come equipped with one flat shelf along the bottom of the cart and small bins hung from the rear of the daughter cart to house different tools and materials.

View cart
Kit Cart

Kit Cart 1050 x 1050 mm – Q-100-0843

This kit cart is another great example of how flexible the FlexQube concept can be. This kit cart is designed to be left at different work and assembly stations and is equipped with shelves to place bins, totes and boxes on, as well as little bins hung above the top shelf to house smaller materials.

View cart
Bin Cart

Bin Cart 1260 x 490 mm – Q-100-0783

This bin cart is a great little design to house bins for different materials and tools. It has two handles attached on each side and four swivel casters, two of which have brakes. This makes this cart very easy to move around the facility to leave at work and assembly stations.

View cart

Want to learn more?

Invalid email address

Required field

Required field

Required field

Required field

Validation error

Message could not be sent

Message sent

FlexQube UK Sales manager Tim Massey
Contact us
Close
FlexQube UK Sales manager Tim Massey

Hi, how can I help you?

Maximum file size is 10mb.

Something went wrong
Please try again or contact sales.

We will get back to you within 24 hours. (Unless it’s during holidays.)