Hi, and welcome to FlexQube

Select language / market
1 September 2020

Why is the eQart is the simplest automation solution on the market?

Joar Manhed

Joar Manhed

eQart Concept Manager

eQart by FlexQube

Since coming to the market at the beginning of 2020, the eQart has shown that it is one of the most straightforward and user-friendly automation solutions out.

Compared to other automation solutions, the speed that operators and engineers can familiarise themselves with the eQart has been impressive. From the beginning, the FlexQube R & D team has had ease of use and simplicity as some of the most critical factors in the eQart development. Factors such as a simpler navigation method, ensuring that there is no integration needed and a user-friendly interface have led to the eQart being the simplest automation solution on the market.

Simple navigation

Initially, it can be seen that having simple navigation technology could be negative; however, it is, in practicality, a big positive. When discussing the implementation and integration of automation solutions with manufacturing engineers, a common thread about complexity is always brought up. The complexity that comes with implementing an automation solution with advanced navigation technology is immense. In our recent Industrial Automation Survey, where we surveyed manufacturing engineers from around the globe, 33.3% stated that implementation constraints were one of the significant challenges being faced in the adoption of automation.

The eQart looks to solves this pain point by using a more straightforward approach to automation. The eQart might not always automate your whole process 100%, but it will automate 80% of the process. When engineers break down the necessity of their automation project and outline the fundamental movements and transports that need to be automated, generally 80% automation is enough to drive greater efficiency, safety, and overall improvements. The eQart navigates optically using a camera installed with a dual side fish eye camera and only requires a contrast on the floor to follow. Most commonly in eQart installations, tape has been used as the primary form of navigation. This is because of the high level of flexibility that comes with having a route that you can easily change and edit how you like.

Looking for some general eQart info? Ask here

Required field

Required field

Validation error

Message could not be sent

Message sent

Short and easy implementation time

Using simpler navigation technology leads to a shorter and easier implementation time. Having an automation solution that can be rolled out of its box and a route set-up in under 2 hours allows eQart users to receive feedback instantaneously. The eQart implementation process’s simplicity cannot be understated; below, you can see the total number of steps involved in the process:

  • Open the box and remove the eQart.
  • Plan your initial route and begin laying the tape.
  • Ensure the tablet is connected to the eQart and open up the eQart cockpit application.
  • Drive the eQart over the tape on the route you have set-up.
  • Set the eQart to the mapping function in the tablet and begin mapping.
  • The eQart is now ready for industrial use.

27.27% of manufacturing engineers responded in our industrial automation survey that skilled labor constraints were an issue in adopting automation solutions. When comparing the implementation time of the eQart to the demands of other automation solutions, the value of having such an easy implementation is remarkable.

User-Friendly Interface

eQart by FlexQube

The eQart cockpit has been designed with the operators in mind. Each eQart is delivered with a tablet, which is used as the main driving and interaction unit. This is so that each eQart can be communicated within a simple and easy to understand way. Tablets and applications have become everyday use, and most employees understand how to use them with ease. This lowers the barrier between the eQart and your operators, as operators can easily use the tablet to communicate and give commands to the eQart. Compared to other automation solutions on the market, operators have limited options in communicating with the robot. This increases the barrier between robot and operator, moving further away from user-friendliness and simplicity.

The eQart was designed from day one as a solution that will become the easiest to use automation solution on the market. While it may not automate entire processes, it is evident that this is not all automation projects’ goal today. 76.92% of respondents in the industrial automation survey stated that improving efficiency is the number one reason for implementing an automation solution. Implementing the eQart will lead to an improvement in efficiency without implementation or integration headaches that come with other solutions on the market.

FlexQube US Southeast sales manager
Contact us
Close
FlexQube US Southeast sales manager

Hi, how can I help you?

Maximum file size is 10mb.

Something went wrong
Please try again or contact sales.

We will get back to you within 24 hours. (Unless it’s during holidays.)