fbpx

4 Steps to Adapting Your Manufacturing Lines to Change

In 2017, UK manufacturers recorded a loss of approximately £180 billion due to problems with material handling systems or downtimes and this was by no means an isolated incident. Statistics show that approximately 33% of businesses in the manufacturing industry also recorded losses caused by material handling inefficiencies. This is why the move to Industry 4.0 where automation becomes the order of the day is slowly but surely gaining ground. But as the manufacturing industry continues to make the move to Industry 4.0, there are a lot of challenges industry leaders and production managers need to come to terms with.

One of the major challenges is the need to adapt manufacturing lines to meet Industry 4.0 standards and what are these standards? These standards are automated production processes where manufacturing lines, material handling carts and systems form a smart factory. In this post, the 4 steps to adapting your manufacturing line to meet these industrial changes will be highlighted to smoothing the transition process for manufacturers.

Step 1 – Automating the Manufacturing Line

The first step is assessing the factory space, production machines and material handling needs to determine how each step of the production process can be automated. This is where digital transformation and the use of sensors, RFID tags and precision module kits come into play. A centralized software application that can collect the data produced by these components in the manufacturing line will also go a long way in increasing the efficiency of the production process.

Step 2 – Enhancing Material Handling and Transportation

In traditional production floors, material handling and movement are generally with the use of generic forklifts, carts and manual transporting devices. As stated earlier, these traditional methods have been responsible for low delivery performance and reduced quality due to damages. In order to manage these challenges, a new material handling process that efficiently supports the smart factory must be developed. During the design phase, the ability to attain the outlined targets should be the driving force:

  • Higher delivery performance
  • Increased safety and ergonomics when designing material handling equipment
  • Improved communication/information link across the manufacturing line.

Once these targets have been understood, the next phase is designing the material handling equipment needed to achieve your set goals. The design process for a custom, efficient and ergonomic material handling cart includes the following;

  1. Defining the objectives of the cart
  2. Analysing the material movement and transportation requirements
  3. Create multiple design options for the material handling cart
  4. Evaluate each design option and select the most adequate option
  5. Implement the chosen design and train employees on proper usage.

If this process is properly done, the results will lead to multiple benefits for the manufacturer such as: a reduction in manual transformation, transparent information sharing, employee safety and reduced downtime. All these will definitely increase production capacity and output substantially while ensuring product quality standards are adhered to.

Step 3 – Embracing Digital Transformation

The next step to dealing with the traditional challenges manufacturing lines face is integrating digitization to speed up production, reduce material loss and deliver high-performing or quality products. To achieve this, devices that can collect data, increase precision levels and automate production must either enhance traditional machines/processes or replace them.

Material handling equipment is also not left out in the digitization revolution. Carts can also be equipped with sensors to determine the weight of equipment they carry, as well as, RFID technology to track their movement. The ability to track the movement of material handling carts will simplify the transfer of information and ensure the next phase in a production line gets its material on-time.

Step 4 – Ensuring interconnectivity and Predictive Analysis

As stated in step 1, a centralized software application with the ability to collect the data produced by the different components that make up the manufacturing line is needed. This is because project automating software can provide automated tickets that communicate the next step to take or the arrival of a material handling cart at a production post.

The data produced by an automated manufacturing line, its machines and supporting devices can also be used to track the health of production equipment. Therefore, automated tickets that schedule the necessary maintenance activities can be produced to ensure a device is either replaced or serviced before it breaks down. This will enhance communication, increase productivity and keep overhead expenditure at a minimum.

According to studies from PWC, 72% of manufacturers across the automotive, aerospace, industrial manufacturing and discrete manufacturing communities will integrate Industry 4.0 process by 2020. Therefore, to remain competitive your manufacturing lines must adapt or be left behind. At FlexQube, we can help you take the major step of customizing your material handling equipment to meet the challenges of this new industrial age. Our experienced engineers understand the technical process of designing customized carts to meet your particular requirements, the FlexQube concept allows you to embrace change and the ever-changing environment that manufacturers exist within. 

If you would like to learn more about the FlexQube concept or our carts contact us via [email protected]

You may also like: 

How to start the transition from forklifts to a tugger train system

FlexQube's top 7 shelf carts

A guide to the basics of successful material handling

DesignonDemandTM

WE CREATE THE CART FOR YOU

Join Us for a Design Session Today!
Need a custom solution? Our design team is here for you!

Our CEO- Anders Andy Legut

Hi! I’m the FlexQube representative for your region. Please contact me at +1 (734) 624 2121 or leave a message below and I will get back to you shortly.